Yep even before starting Apple Inc. out of a garage Steve Jobs and Steve Wozniak were both building illegal blue boxes. Above Steve Jobs talks about how making these illegal boxes helped paved the way for Apple Inc.

Bluebox built by Wozniak, image via wikipedia.

Whats a BlueBox, Wikipedia:

Description:

An early phreaking tool, the blue box is an electronic device that simulates a telephone operator‘s dialing console. It functions by replicating the tones used to switch long-distance calls and using them to route the user’s own call, bypassing the normal switching mechanism. The most typical use of a blue box was to place free telephone calls – inversely, the Black Box enabled one to receive calls which were free to the caller. The blue box no longer works in most western nations, as modern switching systems are now digital and no longer use the in-band signaling which the blue box emulates. Instead, signaling occurs on an out-of-band channel which cannot be accessed from the line the caller is using (called Common Channel Interoffice Signaling (CCIS)).

The blue box got its name because the first such device confiscated by Bell System security was in a blue plastic case.

How Was It Used:

The operation of a blue box is simple: First, the user places a long distance telephone call, usually to an 800 number or some other non-supervising phone number. For the most part, anything going beyond 50 miles would go over a trunk type susceptible to this technique.

When the call starts to ring, the caller uses the blue box to send a 2600 Hz tone (or 2600+2400Hz on many international trunks followed by a 2400 Hz tone). The 2600 Hz is a supervisory signal, because it indicates the status of a trunk; on hook (tone) or off-hook (no tone). By playing this tone, you are convincing the far end of the connection that you’ve hung up and it should wait. When the tone stops, the trunk will go off-hook and on-hook (known as a supervision flash), making a “Ka-Cheep” noise, followed by silence. This is the far end of the connection signalling to the near end that it is now waiting for routing digits.

Once the far end sends the supervision flash, the user would use the blue box to dial a “Key Pulse” or “KP”, the tone that starts a routing digit sequence, followed by either a telephone number or one of the numerous special codes that were used internally by the telephone company, then finished up with a “Start” or “ST” tone. At this point, the far end of the connection would route the call the way you told it, while the users end would think you were still ringing at the original number. KP1 is generally used for domestic dialing where KP2 would be for international calls.